Transform the Lighting Signature of Your Tesla Model 3
Give your Tesla Model 3 Facelift a distinctive daytime running light appearance with replacement LED DRL boards developed for compatible original headlights. Choose fixed Yellow, Red or Amber illumination, or select RGB+W for app-controlled colors, a dedicated white tone, adjustable brightness and supported lighting effects.
Choose Your DRL Style
Select a fixed-color version for a consistent lighting signature or choose RGB+W for extensive smartphone-controlled customization.
Yellow
A distinctive yellow daytime running light appearance inspired by modern motorsport lighting.
Red
A bold red lighting signature that gives the front of your Tesla a more aggressive and expressive appearance.
Amber
A warm amber illumination for a distinctive front-end style with a rich golden-orange tone.
RGB+W
Choose from a broad color spectrum, activate a dedicated white tone, adjust brightness and select supported lighting effects through the compatible smartphone app.
Fixed Yellow, Red or Amber Illumination
The single-color boards provide the selected permanent color whenever the daytime running lights are active. No smartphone app or Bluetooth color controller is required.
Smartphone-Controlled Customization
The RGB+W version uses a Bluetooth control system to provide access to color selection, a dedicated white tone, brightness adjustment and supported lighting effects through the compatible smartphone app.
In addition to replacing the original DRL boards, the Bluetooth controller must be mounted and electrically connected using the required RGB+W wiring.
Compatible Tesla Configuration
This product is intended for compatible Tesla Model 3 Facelift vehicles within the listed product range. It is not intended for earlier Model 3 headlight configurations.
Tesla Model 3 Facelift — 2023 Onward
Intended for compatible facelift vehicles equipped with the original headlight design shown in the corresponding product images.
Earlier Model 3 Headlights
Previous Tesla Model 3 headlight configurations can use different internal daytime running light components and are not covered by this product listing.
Please ensure that your car headlights are the same as the ones shown in the product image(s) before ordering.
Installation Requirements
Installation requires access to the original daytime running light modules and replacement of the corresponding circuit boards inside both headlights.
Original-Style Board Connections
The Yellow, Red and Amber versions use the corresponding original-style board connections and do not require a separate smartphone controller.
Controller and Wiring Connection
The RGB+W version additionally requires installation of the Bluetooth controller and connection of the additional wiring required for app-controlled operation.
Why Choose DRLs Direct?
Developed for compatible Model 3 Facelift headlights Intended for the listed 2023 onward product range
These replacement boards are developed for compatible original Tesla Model 3 Facelift headlights within the listed product range.
Designed for compatible original headlights Not intended for unsupported or aftermarket configurations
The boards are intended for compatible original Tesla headlights. They are not designed for aftermarket headlight assemblies or earlier original versions that use a different internal DRL configuration.
Vehicle-specific replacement board design Developed for the corresponding internal mounting positions
The board shapes and mounting positions are developed to correspond with the internal DRL components of the supported headlight configuration. These are aftermarket replacement boards and are not original Tesla parts.
Three fixed-color options Yellow, Red or Amber illumination
Choose from three distinctive fixed colors. The selected color remains active whenever the daytime running lights are operating, without requiring an app or separate color controller.
Wide RGB color spectrum Personalize the daytime running light appearance
The RGB+W version allows you to select from a broad range of colors and personalize the lighting appearance through the compatible smartphone app.
Dedicated white LED channel A separate white tone alongside the RGB spectrum
In addition to the adjustable RGB color spectrum, the RGB+W boards include a dedicated white LED channel for a cleaner white appearance than a tone produced solely by mixing RGB colors.
Adjustable brightness and lighting effects Additional customization through the compatible app
The compatible RGB+W control app provides access to available brightness settings and supported static or dynamic lighting effects after the controller has been installed.
Bluetooth-based smartphone control Convenient access to the RGB+W lighting functions
The RGB+W controller provides communication between the replacement boards and the compatible smartphone app. Separate mounting and electrical connection of the controller are required.
Designed around the original headlight configuration Changes the DRL appearance without intentional alteration of other functions
When the correct boards are selected and installed properly, the upgrade is intended to change the daytime running light color without intentionally altering separate headlight functions. Compatibility can depend on the installed headlight configuration.
Product Specifications
- Product type
- Replacement LED DRL boards
- Compatible vehicle
- Tesla Model 3 Facelift
- Listed product range
- 2023 onward
- Headlight compatibility
- Compatible original Tesla facelift headlights only
- Single-color options
- Yellow, Red and Amber
- Single-color control
- Fixed selected illumination
- Multicolor option
- App-controlled RGB+W
- RGB+W technology
- RGB LEDs with a dedicated white LED channel
- RGB+W control method
- Compatible smartphone app via Bluetooth controller
- Available RGB+W functions
- Colors, white tone, brightness and supported lighting effects
- Single-color installation
- No separate color controller required
- RGB+W installation
- Separate controller mounting and electrical connection required
- Additional wiring
- Required for app-controlled RGB+W operation
- Installation recommendation
- Professional installation recommended
Installation Guide
Installation requires access to the DRL modules and replacement of the corresponding original circuit boards. The fixed-color versions do not require a separate color controller. The RGB+W version additionally requires installation and electrical connection of the Bluetooth controller and associated wiring.
